الفهرس 
TEST RIG/PROTOTYPEOnly 14 pages are availabe for public view
 |  | from | 32 |  |  |
| | | from | 32 | | |
Abstract
The present work is an experimental investigation of a water desalination system using solar energy that applies the humidification and Dehumidification principles. A prototype/test rig was designed, fabricated and assembled in order to study the effect of water flow rate and the humidifier inlet water temperature against desalinated water productivity. The system consists of a spray type with no packing bed humidifier, a copper coiled Dehumidifier, a flat plate solar water heater, an air blower, a water pump, a water flow meter, a water tank, three thermocouples and four gate water valves. The system is based on an open water- closed air cycle.
A new approach is used such that the humidifier, dehumidifier and the connecting duct between them are made of Poly Vinyl Chloride (PVC) pipes; which makes the system lighter in weight, doesn’t need insulation unlike metal sheets and anti-rust.
This prototype is expected to be a platform to drive the commercialization of a new solar desalination system based on humidification and dehumidification principle. This will be especially beneficial to face the shortage of fresh water supply in future, specifically in remote areas, with a simple design.
The effect of operating parameters on the system characteristics has been controlled, measured and investigated. It was found that the hot inlet water to the humidifier has a significant impact on the water productivity; they are relatively proportional, thus, the more the hot inlet water temperature increases, the more the water productivity increases. It was also found that Saline water flow rate has an impact on the water productivity but inversely proportional.